Hotline : +62 21 62304518
Online Support Converter USD
Selamat Datang di
Halaman Utama / Katalog Produk / Accessories / Linksys Wireless G Exterior Access Point With POE - WAP200E

Katalog Produk

*) Klik gambar untuk melihat secara real
Linksys Wireless G Exterior Access Point With POE - WAP200E

Highlights: Increases wireless throughput and range and reduces "dead spots" in the wireless coverage area with RangeBooster technology Connects to Power over Ethernet devices, simplifying installation and eliminating the need for and cost of installing external power supplies Protects network traffic to safeguard business information with enhanced security, including advanced encryption and security monitoring for additional visibility Provides consistent network performance with integrated quality of service to support voice and video applications Simplifies installation and configuration with easy-to-use web interface

Rp. 5,156,000
Harga sebelum diskon Rp.0
  • Detail Produk
  • Spesifikasi Produk

10BASE-T/100BASE-TX Ethernet port, autosensing half/full duplex and medium dependent interface (MDI) and MDI crossover (MDI-X) Full backward compatibility with 802.11b Easy installation and configuration Supports Wired Equivalent Privacy (WEP), WPA Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA-ENT, and WPA2-ENT authentication (802.11i ready) SMA detachable dipole antennae with 1x2 multiple-input, multiple-output (MIMO) to increase coverage Supports PoE or external DC power Supports 4 BSSID and 802.1Q VLAN to service set identifier (SSID) mapping Supports Simple Network Management Protocol (SNMP) and features an intuitive web-based interface Wi-Fi Multimedia (WMM) wireless QoS support, upgradable to 802.11e Supports wireless roaming based on 802.11F (Inter-Access Point Protocol [IAPP]) Supports access point, bridge mode, and repeater mode Supports wireless security monitoring (working together with Cisco WUSB 200, WMP200 or WPC200 client cards) Supports wireless client isolation

Cisco WAP200 Wireless-G Access Points Specification Standards IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (PoE), 802.1p (QoS priority), 802.1Q (VLAN), 802.1x (security authentication) 802.11i ready (security WPA2), 802.11e ready (wireless OoS), 802.11F (wireless roaming) Ports 10BASE-T/100BASE-TX Ethernet, 12V DC power Buttons Reset Cabling type Unshielded twisted pair (UTP) Category 5 LEDs Power, Ethernet, Wireless, PoE Operating system Linux Setup/Configuration Web user interface Built-in web user interface for easy browser-based configuration (HTTP/HTTPS) Management Simple Network Management Protocol (SNMP) version SNMP version 1, 2c, 3 Event Logging Email notification Remote syslog Web firmware upgrade Firmware upgradeable through web browser Diagnostics Flash, RAM, LAN, WLAN Dynamic Host Configuration Protocol (DHCP) DHCP client Operating Modes Access point Access point mode, point-to-point bridge mode, point-to-multipoint bridge mode, repeater mode Wireless Spec/modulation Radio and modulation type: 802.11b/DSSS, 802.11g/OFDM Channels Operating channels: 11 North America, 13 most of Europe (ETSI and Japan) External antennas 2 (omnidirectional) SMA detachable Transmit power Transmit power (adjustable) at normal temperature range: 802.11b: 18~19 dBm 802.11g: 14~15 dBm Antenna gain in dBi 2 Receiver sensitivity 802.11.g: 54 Mbps at -72dBm 802.11.b: 11 Mbps at -85dBm Security WEP/WPA/WPA2 Wired Equivalent Privacy (WEP) 64-bit/128-bit, WPA-Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA-ENT, WPA2-ENT Access control Wireless connection control: MAC-based SSID broadcast SSID broadcast enable/disable 802.1X IEEE 802.1X support Wireless client isolation Wireless client devices can be Isolated from each other either within an SSID or between 2 SSIDs Wireless Security Monitor Scan and classify wireless devices in the network Report new client and access point joining network and suspicious network events (works together with Cisco WUSB 200, WMP200 or WPC200 business client adapters): Intrusion alarms (e.g., rogue client detected, spoofed MAC address) Denial-of-service alarms (e.g., duration attack, association table full) Vulnerability alarms (e.g., access point is not using encryption, access point is broadcasting SSID) Other alarms (e.g., low speed connection) Quality of Service QoS 4 queues Wi-Fi Multimedia (WMM) wireless priority General General Wireless roaming based on IAPP Auto-channel selection Environmental Dimensions W x H x D 8.69x 8.07 x 7.68 in. (170 x 205 x 195 mm) Weight 0.88 lb (0.4 kg) Power 12V 1A DC input, and IEEE 802.3af compliant PoE Maximum power draw: 3.36W Certification FCC, ICES 003, CE Operating temperature 32º to 104ºF (0º to 40ºC) Storage temperature -4º to 158ºF (20º to 70ºC) Operating humidity 10% to 85%, noncondensing Storage humidity 5% to 90%, noncondensing Package Contents Cisco WAP200 Wireless-G Access Point 2 SMA detachable dipole antennas User guide on CD-ROM Ethernet network cable Power adapter Product stands Registration card Minimum Requirements 802.11b, 802.11g wireless adapter with TCP/IP protocol installed per PC Switch/router with PoE support or PoE injector when used with PoE Web-based configuration: Java-enabled web browser

Info & Promo Info Lainya
11 Desember 2014
Welcome To Toko Kejar
Testimonial Isi Testimonial
  • Ini sangat bagus, toko kejar melayani dengan baik.
    -- Arif Setiawan --

Chat With Us